OCPP 1.6J for charger supervision

Released in 2015, OCPP 1.6 connects chargers to management systems. Its JSON WebSocket variant, 1.6J, carries connector status, authorisation, session starts and stops, and meter readings.

Before installation

The Schneider Charge Pro EVB4S22N40MG has completed sessions with Revavolt. For other models check firmware, third-party server access and explicit JSON support. OCPP 1.6 can also mean SOAP.

How Revavolt helps

Create the charger in Revavolt and enter its WSS address and credentials on the device. Run a short session, compare the kWh with the meter and check the status changes and identifier in the log.

Open Charge Alliance ↗